The camera requires either a cloud storage subscription or a    micro SD card to store recordings. By default, clicking on the app notification will show a screenshot preview. To retrieve the

playback, go to the camera’s live view, and then navigate to the "Messages" or "Playback" tab.

Solid blue light: Device resetted / Motion detected       .

Flashing blue light: Connecting to the Wi-Fi                       

Solid green light: Powered on / Operation succeed / Fully charged

 Flashing Red & Blue light: Ready for Wi-Ficonfiguration.              

The camera is designed to detect motion within a range of 26ft and trigger alerts and video recording.

Please check the Detection Alarm settings and make sure App Notifications are enabled in the Tuya app.

:Lower the resolution or frame rate of the camera.Watch less

live stream videos and turn off unnecessary functions such as     the color nightvision,Adjust motion detection settings to reduce  false alarms.Ensure that the camera is installed in an area with a

strong Wi-Fi signal. Use a solar panel or external battery pack to power the camera

1:Sharing the same Tuya account and logging into it on different devices.

2:using the Home Management feature in the Tuya app to invite family members who have registered with the app.

A:2.4G WiFi has a longer range, better wall penetration, but slower speed and weaker stability.

5G WiFi has a shorter range, weaker wall penetration, but faster speed and stronger stability.

The signal stability for both frequencies is influenced by environmental obstacles and channel interference.

Recommended troubleshooting steps:

A. Use the Check Device Network feature in the app to verify the WiFi signal strength at the camera’s location.

B. Switch between 2.4G and 5G WiFi and test the connection. C. Move the camera closer to the router to test the signal

strength.

D. Ensure the camera is running the latest firmware.

Ensure the camera is powered on and in pairing mode (with  the indicator light flashing red and blue). Enable Bluetooth and location services on your phone to help with the connection.

A camera can only be bound to one account, but there is no

limit to the number of devices bound to an account. To   unbind, use the app to Remove Device, or hold the reset button for 3-5 seconds to reset the camera.